Coolant transfer
S.I.D:
Full kit includes:
- S.I.D. Pump
- 2.5 metres Vacuum Hose
- Barrel Fittings
- Hose Connector
- 750mm Stainless Steel Wand
- Air operated S.I.D. uses standard 45 gal / 205 ltr drum
- Transfers liquid containing swarf from machine sumps etc directly into a 45 gal / 205 ltr metal drum
- Auto shut-off when drum is full - no spillage or double handling
- Robust stainless steel construction - 5 year manufacturer's warrenty
- Recovered products do not pass through the S.I.D. pump so minimum maintenance required
- S.I.D. utilises workshop air at 80 psi to recover up to 28 gallons of oil per minute (2.2 ltrs/sec) using only 7 cfm of air. Perfomance is related to air supply pressure
- Ideal for coolants - water, sump sludge etc
- Clear hose option to help view when collecting tramp oil
WARNING!
Do Not Use S.I.D for volatile liquids, i.e. petrol, alcohol, aviation fuel or any similar liquid with a low Flash Point.
SIMPLE TO USE - no tools required
- S.I.D. screws directly into the 3/4" threaded bung on a 45 gal / 205 ltr sound, undented steel barrel
- The suctionhose assembly is connected to the 2" threaded inlet using the hose tail coupling kit supplied
- Connect a 3/8" I/D airline to 1/4" female threaded inlet on the controlled valve of the S.I.D. pump
- Switch on air and stir the liquid to break any sludge deposits down
WARNING!
DO NOT OPERATE THE BWT S.I.D. PUMP AT PRESSURES IN EXCESS OF 110 PSI AS THIS MAY CAUSE THE DRUM TO IMPLODE!
