Dipslide incubator
The Dipslide Incubator is ideal for the modern Laboratory.
It can be used in the vertical or horizontal position.
Rotating the regulating screw with a screwdriver can control the working temperature. Turning to the left decreases and to the right increases the temperature. (1mm turn = approx 1 degree)
The unit is fitted with an overheating fuse for safety in the event of accidental overheating.
Points to note
Make sure that the door is properly closed, and do not open more than 90 degrees.
Avoid direct sunlight shining on the door.
Do not place plastic tubes direct on the floor on the set, always use the shelf provided.
Setting up
Remove from packaging and plug into mains supply.
Place shelf into desired position, stand thermometer on the shelf.
Switch on and check lamp is lit. After 30 minutes the set temperature is reached (approx 35°C)
Cleaning
The Dipslide Incubator can be easily cleaned with standard cleaning and disinfectant materials. Fluids containing Methanol, Acetone, etc should never be used for cleaning purposes.
Technical Specifications
| Temperature Range : | 25 – 45 °C |
| Temperature Accuracy: | +/- 1°C |
| Voltage: | 230V / 110V / 12V |
| Frequency: | 50 Hz |
| Consumption: | 26W / 0.2A |
| Safety Class: | II |
| Construction: | Flame Resistant PC & ABS |
| Door: | PC, transparent |
| Thermometer: | Up to 60°C |
| Base: | ABS |
| External Dimensions: | 310 x 155 x 168 mm |
| Internal Dimensions: | 220 x 120 x 150 mm |
| Weight: | 1.1 Kg |